退火温度对拉拔态钨丝微观组织及力学性能的影响Effects of Different Annealing Temperatures on the Microstructure and Properties of Drawn Tungsten Wires
杨涵,任卡卢比,贾延琳,肖柱,薄新维,韩校宇,陈畅
摘要(Abstract):
螺旋线行波管作为真空电子元件的核心部件,具有宽频率、高效率等优势。钨丝作为制备行波管的主要材料,其力学性能及微观组织结构对行波管的功能起到关键性的作用。本文以拉拔态钨丝为研究对象,研究了1 100℃和1 300℃退火温度对其微观组织及力学性能的影响规律。结果表明,退火处理的钨丝抗拉强度和塑性都明显下降。当退火温度为1 100℃时,钨丝发生典型脆性解理断裂,这是由于1 100℃下退火后,变形晶粒之间位错密度下降,应力较集中,易发生脆性断裂。而当退火温度上升至1 300℃时,此时钨丝中再结晶晶粒占比较高,这部分晶粒呈现一定的塑性变形,使钨丝的塑性有所提升,断口上可见明显撕裂棱。
关键词(KeyWords): 钨丝;抗拉强度;脆性断裂;晶粒尺寸
基金项目(Foundation): 国家高技术项目(2023JYL01)
作者(Author): 杨涵,任卡卢比,贾延琳,肖柱,薄新维,韩校宇,陈畅
参考文献(References):
- [1]叶志峰,袁广江,何俊,等.螺旋线行波管慢波结构散热性能的发展现状[J].真空电子技术,2023(4):59–65,74.YE Zhifeng,YUAN Guangjiang,HE Jun,et al. Development of heat dissipation performance of slow wave structure for helix traveling-wave tubes[J].Vacuum Electronics,2023(4):59–65,74.
- [2]姜万红,吴文单.电子元器件真空灌封工艺技术研究[J/OL].电子与封装,2025[2025-12-10]. https://doi.org/10.16257/j.cnki.1681-1070.2025.0148.JIANG Wanhong,WU Wendan. Vacuum potting technology for electronic components[J/OL].Electronics and Packaging,2025[2025-12-10].https://doi.org/10.16257/j.cnki.1681-1070.2025.0148.
- [3]WANG J,SHU G,LIU G,et al. Ultrawideband coalesced-mode operation for a sheet-beam traveling-wave tube[J]. IEEE Transactions on Electron Devices,2016,63(1):504–511.
- [4]WEI W,WANG S,WEI Y,et al. Square-and rectangular-ring vertex-bar slow wave structures for high-efficiency wide bandwidth TWTs[J]. IEEE Transactions on Electron Devices,2023,70(1):296–301.
- [5]李梦真.高波段行波管带宽拓展与效率提高的研究[D].成都:电子科技大学,2021.LI Mengzhen. Research on bandwidth expansion and efficiency improvement of high-band traveling wave tubes[D]. Chengdu:University of Electronic Science and Technology of China,2021.
- [6]赵利平.缠绕机张力控制系统研究[D].天津:天津工业大学,2007.ZHAO Liping. Research on tension control system of winding machine[D]. Tianjin:Tiangong University.
- [7]杨旭东,杨乾乾,苏媛媛.行波管螺旋线缠绕机张力控制系统的设计[J].中国制造业信息化,2010,39(19):53–56.YANG Xudong,YANG Qianqian,SU Yuanyuan. Design of control system for TWT helix winding machine tension[J].Manufacturing Informatization of China,2010,39(19):53–56.
- [8]詹志洪.钨加工技术发展的某些动向[J].稀有金属与硬质合金,1986(4):57–58,13.ZHAN Zhihong. Some trends in the development of tungsten processing technology[J]. Rare Metals and Cemented Carbides,1986(4):57–58,13.
- [9]黄景文,吴章汉,骆忠汉.温轧工艺对Fe-6.5%Si薄板织构的影响[J].电工钢,2021,3(4):17–22.HUANG Jingwen,WU Zhanghan,LUO Zhonghan. Effect of warm rolling process on texture of Fe-6.5%Si steel sheet[J].Electrical Steel,2021,3(4):17–22.
- [10]曲之豪,王重懿,付金禹,等.温轧工艺对铝镍复合板组织性能的影响[J].轻合金加工技术,2025,53(1):28–35,45.QU Zhihao,WANG Zhongyi,FU Jinyu,et al. Effect of the warm rolling process on the microstructure and properties of Al-Ni composite plate[J]. Light Alloy Fabrication Technology,2025,53(1):28–35,45.
- [11]WANG Y,DING M,ZHENG Y,et al. Finite-element thermal analysis and grain growth behavior of HAZ on argon tungsten-arc welding of 443 stainless steel[J]. Metals,2016,6(4):77.
- [12]仇群峰.钨灯丝再结晶行为研究[J].稀有金属快报,2006(4):43–44.
- [13]佘海南,邵国辉,刘卫民,等.拉拔钨丝工艺过程中抗拉强度的控制[J].中国钨业,2001,16(2):33–34.SHE Hainan,SHAO Guohui,LIU Weimin,et al.The control of tensile strength in the process of drawing tungsten wire[J].China Tungsten Industry,2001,16(2):33–34.
- [14]王龙滨,朱恩科,王增民.掺杂钨丝抗拉强度对其绕丝性能的影响[J].中国钨业,2003,18(3):20–22.WANG Longbin,ZHU Enke,WANG Zengmin. The influence of tensile strength of doped tungsten wire upon wire-wound performance[J]. China Tungsten Industry,2003,18(3):20–22.
- [15]夏福中,汪明朴,李周,等.掺杂钨带退火过程中的组织与织构演变[J].中南大学学报(自然科学版),2013,44(4):1359–1366.XIA Fuzhong,WANG Mingpu,LI Zhou,et al. Recrystallization and texture of tungsten strip[J]. Journal of Central South University(Science and Technology),2013,44(4):1359–1366.
- [16]程竹青,易伟,王朋飞,等.成品轧制和退火对锆合金管材微观组织及力学性能的影响[J].核动力工程,2025,46(增刊2):136–140.CHENG Zhuqing,YI Wei,WANG Pengfei,et al. Influence of final rolling and annealing on the microstruture and machanical properties of zirconium alloy tubes[J].Nuclear Power Engineering,2025,46(Suppl.2):136–140.